Will your air conditioning need planning permission?
Find the house on the map, say where the outdoor unit would go, and see what the rules say: the permitted development rules that have covered air conditioning since May 2025, and the noise test that comes with them.
Find the house
We look for a conservation area, a listed building, a scheduled monument, an Article 4 direction and a National Landscape where the pin is.
Drag the pin onto the house itself, or tap the map where it is. A postcode can cover a whole street, and a boundary can run between neighbours.
The house and the outdoor unit
The rules are about the outdoor unit: the box outside that the pipes run to.
The noise test, at the nearest neighbour
MCS 020 a) allows 37 dB(A) from the unit at every neighbouring window and door of a habitable room (a bedroom or living space, a kitchen-diner included; not a bathroom, hall or garage), a metre out from each. In a block of flats, the other flats’ windows count too. Try the nearest one: it’s usually the one that decides.
Put in the distance and the surfaces, and this shows the loudest unit that would pass at that window.
The loudest unit that would pass here. Compare the maker’s sound power figure (Lw), not the lower sound pressure figure or a quiet-mode one.
This is an estimate for one window, using the sum in MCS 020 a), the noise standard the law names. Two outdoor units are added together at each window: two the same are 3 dB louder than one. The full check covers every neighbouring window and door, with the exact unit’s figure from the maker’s data (we use the higher of heating and cooling). We run it before we quote, and give you a copy.
Where the answers come from
The rules are Class G of Part 14 of Schedule 2 to the General Permitted Development Order 2015, as amended by SI 2025/560, and the noise test is MCS 020 a) Issue 1.1, which MCS publishes free. This page isn’t connected with MCS or endorsed by it. Both are explained in plain English in our planning guide and our guide to noise and neighbours.
The map check uses planning.data.gov.uk, the government’s planning data, which councils, Historic England and Natural England supply. If a council hasn’t published something, it won’t show here, so a clear result means nothing is recorded at the pin, not that nothing applies.
What happens to what you enter
Nothing you enter comes to us, and the page keeps nothing. To look them up, your postcode goes to postcodes.io and the pin’s position to planning.data.gov.uk, and the map is drawn by OpenStreetMap.
Contains public sector information licensed under the Open Government Licence v3.0. Listed buildings and scheduled monuments: © Historic England 2026; contains Ordnance Survey data © Crown copyright and database right 2026. Postcodes: contains OS data © Crown copyright and database right; contains Royal Mail data © Royal Mail copyright and database right; source: Office for National Statistics, licensed under the Open Government Licence v3.0. Map © OpenStreetMap contributors.
General information rather than formal planning advice, and the rules do change. Current as at November 2026, for England. For anything specific to your house, confirm with the council or ask us at the survey.